Hello Beauties! Please follow these steps to ensure a long and healthy life for your contact lenses.
We DO NOT guarantee that colors will look the same as pictured. Everyone has different pigmentation in their eyes and photos are taken in different lighting which can cause lenses to look slightly different.
Step 1: Check the lenses
We try our best to check lenses before sending them out to you, but sometimes defects aren't easily seen. Please contact us right away if you detect any of the following:
Before wearing your lenses for the first time make sure to let them soak for at least six (6) hours in multipurpose solution for soft contact lenses.
Step 3: Cleaning & Hygiene
Keeping your lenses clean is very important and will help minimize the risk of bacterial infections.
Make sure to always wash your hands with mild soap before handling your lenses.
Step 4: Putting in lenses
Putting in contact lenses can be a little tricky, especially if you’ve never worn them before. But as with everything, practice makes perfect!
Step 5: Removing lenses
After you’ve had your fun with your contact lenses it’s time to remove them.
Cleanliness is the most important aspect of proper contact lens care. It’s important to care and follow proper maintenance for successful wearing.
Cleaning and disinfecting solutions are import to minimize the risk of bacterial eye infections. Remember to always use fresh solution and discard solution from lens case after each use.
Saline solution and daily cleaner can be purchased at any drug store/pharmacy. The saline solution is used for rinsing your contact lenses. The daily cleaner is used for cleaning your contact lenses.
Cleaning your contacts is very easy. Just place a few drops in the palm of your hand and carefully rub the lens for about 20 seconds, making sure to clean both sides.
Multipurpose solution can be used for cleaning, rinsing, disinfecting and storing your contact lenses. Clean your lenses as you would with daily cleaner, then rinse, disinfect, and store with multipurpose solution.
Automatic Contact Lens Cleaner is a device that automatically cleans your lenses. This device is clinically tested and proven to be three times more effective than standard finger rubbing cleansing.
Lens Case Cleanliness and frequent case replacement is essential for minimizing the risk of contamination. Rinse your lens case and covers in hot running water. Replace lens cases at least once every three (3) months.
Prevent dryness by re-wetting lenses as needed with Contacts Eye Drops.
Do not sleep or swim with contact lenses in your eyes.
Do not wear your contacts for more than eight (8) hours per day.
Do not use tap water to rinse or store lenses. Tap water contains chlorine, minerals and metal particles, which can damage both the lenses and the eye. Most importantly, water contains micro-organisms, which can lead to serious infections of the eye.
Do not panic if your lens gets lost behind your eye. It should work itself around to where you can see it. If the lens does not work itself around, try putting some eye drops or a few drops of saline solution into your eye. Next, look up, down and from side to side to attempt to move the lens. You can also close your eyes and gently move your finger over your eyelids around the socket of the eye to reposition the lens. This may help move the lens to where you can see it more easily.
Put in your contact lenses before applying makeup.
Take out your contact lenses before removing makeup.
Remove your lenses immediately if you develop unusual pain, experience stinging, redness, unusual blurred vision, discharge or light sensitivity. If lens is damaged, do not put the lens back on your eye.